Technical data 01. 2008

NEW UV offset printing blanket

Surface

Construction

Surface Finish

Micro buffed / EPDM composition

hybride blanket

Construction Layer

 3 Textile layers

Color

Purple

Compressible Layer

  Microsphere closed cells

technical characteristics

Thickness/Gauges

1.96 mm / .077" ²  1.70mm / .067 only on special request

Surface Roughness <RA>

<RZ>

0.60 mic.

2.5 prd / 3.0 acd

Overall Hardness <Shore A>

 79º (DIN 5305)

Elongation at 500Nm/50mm

0.20% ± 0.05%

Carcass – textile back side

YL-Chemical treated, sealed, solvent and moisture repellent

Gauges Loss

0.01±  micron

Application

Standard Roll widths

Sheet-fed Presses and Webs

Cross section 628UV 1.95mm, 60x

 1060-1080 mm /41 ¼ ”  1.95mm/.077”

 Roll length 30 meters net

 on request only:  

 1.70mm .067” and roll widths

 780 mm / 30 ¾ ”

 1320 mm / 52”

 1650 mm / 65” in 2009

Benefits

CNI GRAPHICS  NEW 628 UV-3

HYBRID OFFSET BLANKET

Paper and plastic printings with UV INKS

Designed and manufactured for UV inks and UV solvents resistance, fine surface rubber-polymer-EPDM compound with very good resistance and sharp dot reproduction, combined with excellent ink transfer.

Long press and run life, easy to wash.

Backside textile sealed against moisture and solvent pick up with extreme stable stretch quality.

For packaging and card board printing, we recoemmend the

622HY - UV with modified new fine buffed EPDM surface was launched in November 2006

Newly designed UV-chemical resistant  EPDM fine

         print surface for 4 color image.

very low sinking or Gauge loss when mounted and during

         printing

Best register control and low paper stretching

Excellent Smash and Edge cut resistance, through extra

         compressibility

Lower PS-Plate wearing

Micro-buffet for perfect Paper Release and Ink transfer

Fast  wash up and high chemical resistance

   Importer/Distributor:

Blanket manufacturer

CNI GRAPHICS RUBBER, Shanghai

AIRDOT 628UV. 09.09